Plastic Garment Bag with Printing

Advantages 

1. Easy to use and carry things.

2. Prevent goods from stealing.

3. OEM is welcome.

Flame-retardant and environmental protection of communications appliances, because of the good PC electrical insulation performance, widely used in telecommunications equipment, the current PC has been a large number of replacement of the original Bakelite, the future focus on the development of flame-retardant pc in the field of communications and electrical appliances, therefore, non-polluting flame-retardant PC materials become the focus of development.

Brominated flame retardants due to the toxicity of the reduction of use, and halogen-free environmentally friendly phosphorus flame retardant agent will significantly reduce the PC thermal deformation temperature and impact strength, so it is more suitable for silicone system resistance agent. In addition, with the miniaturization of communication appliances, the higher requirements of PC materials, the ABS alloy is particularly suitable for applications in communications and aerospace industries.

We have a production process for Plastic Garment Bag With Printing.

A. Put the transfer paper into the ink-jet printer, after drying will print a good picture with the cutting tool to cut off the excess, and in the image part of the 0.5cm white edge, lest the ink ooze, soiled clothes. Cover the transfer paper on the picture surface, gently remove the image from the back paper, and the image is placed on the fabric of the desired transfer, and the iron is ironed across the transfer paper. 

B. Please work on the smooth surface of the ironing, and request that the carrier can withstand greater pressure, do not recommend the use of household ironing board, because the home ironing board has a flexible and weak support strength, is not conducive to image bonding.

C. Please set the iron temperature to the highest. After reaching the highest temperature, start ironing, if the iron temperature is low, the image transfer is not sufficient, easy to fall off. Be careful not to use a steam file, which affects the transfer effect.

D. Push the back half of the iron on the compartment and move it evenly and slowly for several minutes, and pay attention to the special force when pressing the corner of the transfer paper, otherwise it will not achieve the best effect.

E. After the ironing is finished, place the transfer paper for several minutes after cooling. 

F. If using the hot drawing machine temperature set in 165°c, time 30 seconds.